Tickmi

Install Tickmi Print to print tags and badges directly

Tickmi Print is a small background app that runs on the computer at your desk. Install it once, pick your printer once, and every tag, badge and ticket from Tickmi Studio prints straight to the right printer at the right size, with no print dialog.

· 6 min read · Checked against the Tickmi software

On this page
  1. 1. Download Tickmi Print
  2. 2. Install on each operating system
  3. Windows
  4. macOS
  5. Linux
  6. 3. Connect to Tickmi Studio
  7. 4. Choose a printer
  8. Direct printing, no driver needed
  9. 5. Paper size and test print
  10. 6. The print station resumes after a network loss
  11. 7. Troubleshooting common problems

Browsers do not let a web page choose a printer on its own, so printing from Tickmi Studio normally means picking the printer, paper size and margins in the print dialog every time. Tickmi Print does that for you: it lists the printers on the computer, receives print jobs from Tickmi Studio and prints them directly at the exact size in mm of your template. The app only accepts jobs from Tickmi pages and runs on Windows, macOS and Linux computers. It cannot be installed on phones or tablets.

1. Download Tickmi Print

The easiest way is to download it from Tickmi Studio, on the same computer that will be connected to the printer:

  1. Open your ticket product → Check-in → Print tags (or Badges).
  2. Under Printer, the box Print straight, no dialog — install Tickmi Print has a Download Tickmi Print for button for the operating system Studio detects. The Other systems: line has links for the rest.

You can also download directly:

Operating systemInstaller
Windows 10/11 (64-bit)TickmiPrint-Setup.exe
macOS (Intel and Apple chips)TickmiPrint-mac.dmg
Linux 64-bitTickmiPrint-linux-x64.AppImage or the TickmiPrint-linux-amd64.deb package (Ubuntu, Debian)

2. Install on each operating system

Windows

  1. Run TickmiPrint-Setup.exe. The installer installs for the Windows account you are using, asks nothing else and opens the app when it finishes.
  2. The installer is not code-signed yet, so Windows SmartScreen may show a "Windows protected your PC" warning about an unknown publisher. Click More info → Run anyway to continue.
  3. The Tickmi Print icon appears in the system tray at the bottom right of the screen (it may be inside the hidden-icons arrow).
Only download the installer from Tickmi Studio or from the media.tickmi.com addresses in the table above. Never run a Tickmi Print file you received in a message or from any other source.

macOS

  1. Open TickmiPrint-mac.dmg and drag Tickmi Print into the Applications folder.
  2. Open Tickmi Print from Applications. The macOS version is notarized by Apple, so it opens like any other app.
  3. The app does not show in the Dock. Its icon sits in the menu bar at the top of the screen.

On macOS, use Chrome to open Tickmi Studio, because Safari may block the connection to Tickmi Print.

Linux

  • .deb package: install it with your software installer or with sudo apt install ./TickmiPrint-linux-amd64.deb. The package includes a rule that lets the signed-in user use a USB printer without administrator rights.
  • AppImage: allow the file to run as a program (right-click → Properties → allow executing, or chmod +x), then open it.

3. Connect to Tickmi Studio

  1. Keep Tickmi Print running, go back to the Tickmi Studio page and click Check again.
  2. When you see Connected to Tickmi Print with a version number, the printer list shows the printers on the computer.

On first launch, Tickmi Print turns on Start with computer automatically, so the app is ready as soon as you switch on the computer at the desk. Click the Tickmi Print icon to open its menu: the status Running — ready to print, the number of printers on the computer, Open Tickmi Studio, Open print log, Start with computer, Language and Quit Tickmi Print.

When a new version is available, Studio shows a notice that a new Tickmi Print version is available. Click Download update and run the installer over the old version; the printers you chose are kept.

4. Choose a printer

Tickmi Studio remembers a separate printer for each job: Choose tag printer (Print tags), Choose badge printer (Badges) and Choose ticket printer (when printing tickets). The choice is saved on that computer, so each desk computer picks once.

Direct printing, no driver needed

For USB thermal tag printers, the tag printer list has a group called Direct print (no driver) — recommended. Tickmi Print renders the tag as an image and sends it straight to the printer, independent of the manufacturer's driver, so the size is exact and printing is more reliable. If you picked a printer in the Printers with installed drivers group that can print directly, Studio suggests Use this printer.

  • Tag printers with a LAN or Wi-Fi port: click Add a network label printer (IP), then enter the IP address shown on the printer's self-test page (hold FEED while powering on), the Port (default 9100) and a Nickname, for example "Desk 1".
  • Click Settings next to a printer to adjust Command language (Xprinter, TSC and Gprinter use TSPL; Zebra and Honeywell use ZPL; receipt printers use ESC/POS), Label gap (mm), Darkness (0–15), Horizontal offset (mm), Vertical offset (mm) and Speed (1–6), then click Save settings.
  • Just changed the label roll? Click Calibrate: the printer feeds a few blank labels to measure the size and gap.

Direct printing is for tags. Badges and tickets print through printers with an installed driver.

5. Paper size and test print

  • Tags: click Test print. A printer using a driver gets one 100 × 50 mm test tag. A direct-print printer prints a test tag at the Loaded label size: the black frame should sit right on the label edges, with ticks every 5 mm. If it is off, adjust the horizontal and vertical offsets and test again.
  • Badges: choose the Paper before you test print. Centered on A4 is for office printers (the badge prints in the middle of an A4 sheet with cut marks, and both sides line up). Exact badge size is only for badge printers or machines loaded with that exact paper. If you have not chosen, small badges the size of a plastic card default to exact size, and larger badges default to centered on A4. Test print produces one badge marked FRONT and BACK with an arrow on the top edge, so you can check 2-sided printing.

To choose a template, lay out pages and print in bulk, see Print labels and badges.

6. The print station resumes after a network loss

The auto print station uses Tickmi Print to print every successful check-in. It is designed so your desk never has to stop:

  • If the network drops, the station shows Connection lost — retrying and, once the connection is back, prints the check-ins it missed.
  • If you reload the page or go to another screen and come back, the station carries on with the choices saved on that computer.
  • If the printer has a problem or Tickmi Print is closed, the station pauses, keeps the waiting check-ins and prints them again when the printer is ready. You can click Print this one via the browser, Skip this one or Clear stuck print jobs so the desk does not slow down.

7. Troubleshooting common problems

What you seeWhat to do
Windows shows SmartScreen during installationThe installer is not code-signed. Click More info → Run anyway.
Studio cannot find Tickmi PrintReopen the app from the Start menu or Applications, wait a few seconds, then click Check again. On macOS, use Chrome instead of Safari.
The printer is out of labelsLoad a new label roll, close the cover firmly, press FEED on the printer once, then click Check again.
The printer cover is open / The printer is pausedClose the cover or press FEED/PAUSE; the last label prints by itself.
Printer not foundSwitch the printer on, plug the USB cable in firmly or try another USB port, then click Check again.
The label roll does not match the templateLoad the right roll, or click Calibrate so the printer measures again after you change the roll.
Strange characters print instead of the tagOpen the printer's Settings and change the Command language.
The printer does not respond after 60 secondsCheck the printer. PDF/XPS printers cannot print directly because they ask for a file name.
The tag prints smaller or shifted to one sideCheck whether the tag template has an element outside the frame; with a direct-print printer, adjust the horizontal and vertical offsets.

Still not printing? Click Copy details for Tickmi support and paste them into your message to Tickmi. In the Tickmi Print menu, Open print log shows which print job failed.

Learn more about printing event badges and the self check-in kiosk combined with tag printing.

Frequently asked questions

Is Tickmi Print required?

No. Without Tickmi Print, Tickmi Studio still prints through the browser's print dialog. Tickmi Print makes printing direct, at the right size, with no need to pick the printer again every time.

Why does Windows show a warning when I install Tickmi Print?

The Windows installer is not code-signed yet, so SmartScreen reports an unknown publisher. Only download it from Tickmi Studio or media.tickmi.com, then click More info and Run anyway to install.

Can one computer use several printers?

Yes. Tickmi Studio remembers the tag printer, badge printer and ticket printer separately on each computer, so one desk can print both a tag and a badge for every check-in.

Can I install Tickmi Print on a phone?

No. Tickmi Print runs on the Windows, macOS or Linux computer at your desk that is connected to the printer.

Can't find your answer?

The Tickmi team is here to help on hotline 0349 632 920, or try Tickmi for free and follow along.

Contact Tickmi

Request a callbackChat on ZaloMessage on FacebookHotline 0349 632 920

Tickmi uses essential cookies to run this website and Google Analytics to measure page views and clicks so we can improve the product (only if you agree). Privacy policy